Bali Series - BWF - Crown Boiler

Bali Series (BWF)

Products > Residential Boilers > Residential Gas > Bali Series (BWF)

The Bali Series (BWF) residential, cast iron, hot water boiler is a fully-packaged, installer-ready product. An integral fan permits venting directly through a wall. With the addition of a Category-1 Vent Kit, the Bali has the option of venting into some chimneys that are too small to vent an atmospheric boiler of the same input. The Bali Series is packaged with an electronic ignition system and has the option of either natural or LP gas.

Print Product Brief
Print Product Brochure

Air Conditioning Heating and Refrigeration Institute AHRI Member

Constructed and tested in accordance with ASME American Society of Mechanical Engineers Section Four

Intertek ETL Listed Canada United States

Product Brief
Product Ratings
Product Dimensions
Related Documents

Type:	Residential
Heat Exchanger:	Cast Iron
Fuel:	Gas Fired (Natural or LP)
Input:	61-229 MBH
Efficiency (AFUE)	82.0% - 83.3%
Venting:	Direct Exhaust
Ignition:	Electronic Ignition
Trim:	Water

Domestic Water:	N/A
Burner:	N/A
Configuration:	Packaged
Notes:	Designed for installation on combustible floors.

NATURAL OR LP GAS
MODEL NUMBER	NO. OF SECTIONS	INPUT (BTU/HR)	D.O.E HEATING CAPACITY (BTU/HR)	IBR NET RATING (BTU/HR)	AFUE %	WATER CONTENT (GALS.)	APPROX SHIPPING WEIGHT (LBS)

BWF061	3	61,000	51,000	44,000	83.3	3.2	282
BWF095	4	95,000	78,000	68,000	83.1	4.0	332
BWF128	5	128,000	106,000	92,000	82.8	4.7	382
BWF162	6	162,000	134,000	117,000	82.5	5.5	432
BWF195	7	195,000	161,000	140,000	82.3	6.3	482
BWF229	8	229,000	189,000	164,000	82.0	7.0	532

	Altitudes above 2,000 ft. - ratings should be reduced at a rate of 4% for each 1,000 ft. above sea level (U.S.A. only). In Canada, boilers are certified for altitudes up to 2,000 ft. only. Specifications and dimensions are subject to change without notice. Consult factory if an unusual piping or pickup requirements exist. The Net I=B=R Water Ratings shown are based on a piping and pickup allowance of 1.15.

MODEL NUMBER	DIMENSION A (INCHES)	VENT DIAMETER (INCHES)

BWF061	16 - 1/8	3
BWF095	19 - 3/4	3
BWF128	23 - 3/8	3
BWF162	27	3
BWF195	30 - 5/8	4
BWF229	34 - 1/8	4

Bali - BWF Standard Dimensions

Bali Literature

Date: 11/19/2010 3:17:11 PM
Size: 793.83 kb

Bali Installation Manual

Date: 11/19/2010 3:18:13 PM
Size: 884.53 kb

Bali Cat 1 Vent Kit Manual

Date: 11/19/2010 3:17:30 PM
Size: 186.6 kb

Gas Boiler User Manual

Date: 1/18/2012 2:23:46 PM
Size: 853.5 kb