Cabo 2 Series

Cabo 2 (CWD)

Products > Residential Boilers > Residential Gas > Cabo 2 (CWD)

The CABO-2 Series (CWD) residential, cast iron, direct-vent, hot water boiler is a fully-packaged, installer-ready product. The Bali Series is packaged with an electronic ignition system and has the option of either natural or LP gas. The Cabo-2 Series control supports priority zoning for an indirect water heater and an optional plug-in outdoor temperature reset control. Each model is ENERGY STAR® qualified.

A cast iron, wet-leg heat exchanger provides efficient heat transfer and reliability over the product's lifetime.

Print Product Brief
Print Product Brochure

Air Conditioning Heating and Refrigeration Institute AHRI Member

Constructed and tested in accordance with ASME American Society of Mechanical Engineers Section Four

Product Brief
Product Ratings
Product Dimensions
Related Documents

Type:	Residential
Heat Exchanger:	Cast Iron - Wet Leg
Fuel:	Gas Fired (Natural or LP)
Input:	60 - 245 MBH
Efficiency (AFUE)	85.1% - 85.3%
Venting:	Direct Vent
Ignition:	Electronic
Trim:	Water
Domestic Water:	N/A
Burner:	N/A
Configuration:	Packaged
Notes:	Energy Star qualified

NATURAL OR LP GAS
MODEL NUMBER	NO. OF SECTIONS	INPUT (BTU/HR)	D.O.E HEATING CAPACITY (BTU/HR)	IBR NET RATING (BTU/HR)	AFUE %	WATER CONTENT (GALS.)	APPROX. SHIPPING WEIGHT (LBS)

CWD060	3	60,000	51,000	44,000	85.1	2.0	280
CWD083	4	82,500	71,000	62,000	85.1	2.6	315
CWD110	5	110,000	94,000	82,000	85.2	3.1	350
CWD138	6	137,500	118,000	103,000	85.2	3.6	385
CWD165	7	165,000	142,000	123,000	85.2	4.2	420
CWD193	8	192,500	165,000	143,000	85.2	4.7	475
CWD220	9	220,000	189,000	164,000	85.2	5.2	525
CWD245	10	245,000	211,000	183,000	85.3	5.8	580

	Altitudes above 2,000 ft. - ratings should be reduced at a rate of 4% for each 1,000 ft. above sea level (U.S.A. only). Specifications and dimensions are subject to change without notice. Consult factory if an unusual piping or pickup requirements exist. The Net I=B=R Water Ratings shown are based on a piping and pickup allowance of 1.15.

MODEL NUMBER	"A" (INCHES)	COLLAR DIAMETER (INCHES)
		INLET	EXHAUST

CWD060	16 - 1/8	4	3
CWD083	19 - 3/4	4	3
CWD110	23 - 3/8	4	3
CWD138	27	4	3
CWD165	30 - 5/8	4	3 or 4
CWD193	34 - 1/8	4	3 or 4
CWD220	32 - 3/4	4	3 or 4
CWD245	41 - 3/8	4	4

CWD General Specifications

Cabo 2 (CWD)

Cabo Literature

Cabo Installation Manual

Cabo Coaxial Terminal Manual Supplement

Gas Boiler User Manual